Page 37 - 2018村田型錄1-46

R R
安裝方式選項:

MOTOR MOUNTING SELECTIONS:

止付螺絲鎖固位置
Installation position
of set screw

S-止付式
S-Set screw fixed type 馬達安裝面
Motor mounting
(馬達鎖固規格/位置） surface
1.馬達軸心鍵與減速機入力軸鍵槽對齊置入。 Pitch circle Diameter of
2.馬達與減速機結合後將馬達上4根螺絲鎖緊。 motor (P.C.D) 減速機
3.使用T 型板手將減速機入力軸內的止付螺絲鎖緊即可。 Reducer

1.Place motor shaft key and reducer input shaft key way in a straight line,and
insert motor shaft into reducer input shaft.
2.After connection of motor and reducer, tighten four screws into hex-socket
cap screw holes.
3.Fix the set screw on reducer input shaft by T-type spanner.

套環式鎖固位置
Installation position
of clamp

L-束緊式:

L-Clamp fixed type
馬達安裝面
Motor mounting
(馬達鎖固規格/位置） surface
1.馬達軸心鍵與減速機入力軸鍵槽對齊置入。
2.馬達與減速機結合後，將馬達上4 根螺絲鎖緊。 Pitch circle Diameter of 減速機
motor (P.C.D)
Reducer
3.使用T 型板手將入力軸束緊環鎖緊即可。
1.Place motor shaft key and reducer input shaft key way in a straight line, and insert
motor shaft into reducer input shaft.
2.After connection of motor and reducer, tighten four screws into hex-socket cap
screw holes.
3.Tighten the clamp of reducer input shaft by T-type spanner.

33 ● 此樣本中的所有產品型號及參數如有變更恕不另行通告，訂貨前請與本公司聯絡確認 ● 此樣本中的所有產品型號及參數如有變更恕不另行通告，訂貨前請與本公司聯絡確認 34
● the content of this document is subject to change without notice. please contact us before ordering.
● the content of this document is subject to change without notice. please contact us before ordering.